Brake caliper paint spray

product_code: 80620, 80621, 80622, 80623

Description:

The enamel is intended for protecting brake calipers and drums against corrosion. The paint withstands heating up to 150oC. It will give the wheels sporty character. The product can be used in car and motorcycle tuning. The paint is resistant to abrasion, scratches, bumps and petrol. Available in 4 colors (black, red, silver, yellow).

 

PAINT CHARACTERISTICS:

• Quick drying.
• High gloss.
• Good covering of the substrate.
• Good adhesion to the substrate.
• Resistant to brake fluid and fuel.
• Resistant to water, solar radiation, temporary heat up to 150oC.
• It does not contain lead compounds, chromates and substances that affect the ozone layer.

Instruction for use:

• Shake the container for approx. 2 minutes before use to mix the content.
• The surface to be painted should be previously sanded.
• Ensure that the surface is dry, clean, free from oil, grease, etc. It is recommended to use silicone remover RANAL.
• Recommended distance of the nozzle from the painted surface is: 20-30 cm.
• Apply the paint in 2-3 thin layers at intervals of 5-10 minutes.
• It is best to use at temperature range of 18-25oC.
• After spraying, clean the nozzle by turning the container upside down, pointing the nozzle in a safe direction and pressing the button for approx. 3 seconds.
• It is recommended to use painted calipers when the film is completely dry.
• Covering a flat surface from a container ca. 1.5 m2.

PACKAGING:

400ml.