Fibrous waterproofing material can be used in concrete, ethereal, plaster, brick, wooden surfaces and all places requiring waterproofing such as roof and basement walls, different joints, places where there is a risk of self-cracking such as the foundations of chimneys and other.

Vertically about 0.75-1 kg/m², horizontally 1-1.5 kg/m², depending on the surface condition and unevenness. For final consumption, make a test run.

The surface on which the fibrous waterproofing material is to be applied must be dry and thoroughly cleaned with oil, dust and old paint in order not to interfere with adhesion. Before the product is applied on concrete and plastered surfaces, it is advisable to rinse with a solution of 1 part hydrochloric acid and 10 parts water. Treated surfaces should be under a slight slope to avoid unnecessary accumulation of material. Use Betek Stako to level and smooth the floor. Apply at least two layers, each perpendicular to the previous. Wait for 24 hours between layer application. Surfaces treated with fibrous waterproofing material should be protected from rain, snow and frost for 24 hours. During application the surface temperature should be between + 5 ° C and +35 ° C and the humidity 65% ​​HB. A protective layer should be applied to the waterproofing material when applied to surfaces that are subject to mechanical shocks and which require high resistance to traces of shocks and shoe.

Initial drying: 12 hours. Apply the second layer: After 24 hours. Full drying: 48 hours.

The fiber-insulating material is ready for use. When used as a primer, it is diluted with 100% water.