>
Acrylic clear coat ECO 2:1
product_code: 30301-3/0.5 лт, 30301-1/1 лт, 30302/5 лт
Description:
Two-component acrylic clear coat designed for protecting metallic base. It has good flow; and dry and cured coat is characterized by good gloss and hardness. Thanks to special additives obtained coat is resistant to weather conditions and UV radiation. Perfectly cooperates with all base coats available on the market. Shall not be used with a thinner. It is ready for use once mixed with hardener. It does not meet the VOC standards.
Features
Thanks to the special components, the surface becomes resistant to short-term atmospheric influences and UV radiation. Applicable to all varnishes-bases that are sold on the market. The product is not mixed with a diluent. Ready to use after adding a hardener.
Mixing ratio
Acrylic Lacquer MS - Series 'EKO' 2 + 1: 2 parts
Acrylic Lacquer Hardener MS - series 'EKO' 2 + 1: 1 part
Directions for use
Before mixing, carefully mix the components. Apply acrylic varnish on the hardened basecoat. Apply with a gun one, two or three single layers. Once you have applied one coat, wait about 5-10 minutes to dry. The drying time depends on the temperature and the density of the layer. 10 minutes after applying the last layer, you can harden the surface with a higher temperature. Caution: Do not apply acrylic varnish at temperatures below 10 ° C.
Drying time
- standard - about 14 hours at 20 ° C or 45 minutes at 60 ° C
- slowly - 7 days at 20 ° C
- fast - 20-25 minutes at 20 ° C or 10 minutes at 60 ° C
Package
0.5 l, 1 l, 5 l with hardener