FEATURES

The product has good filling quality and is easy to handle. It is also characterized by good adhesion to the lower layers and smooth surfaces, making it a very good insulator between polyester kits and acrylic primers. The kit is a perfect protection against the harmful effects of overgrowth or deficiency of hardeners in polyester whales. After grinding the hardened product, a very smooth surface is obtained.

APPLICATION SURFACES

Steel
Aluminum
Two-component acrylic primers
Polyester whale RANAL
Old lacquered surfaces
Plastic surfaces
Caution: Do not apply directly to aqueous primers, mono-acrylic or nitrocellulose products.

MIXING RATIO

Liquid whale 100 parts
Hardener 6.5 parts

DIRECTIONS FOR USE

Carefully mix components according to their ratio. If necessary, add 10% diluent for liquid spray spray. Apply with a spray gun (nozzle ø2.2 - 3.0 mm, pressure 3-4 bar) from one to three coats. The maximum thickness of the applied layers should not exceed 50 μm. We recommend cross-painting multiple layers of low-pressure guns for economic and environmental reasons. Once you have applied one layer, wait a while for the thinner to evaporate. This product should be used in rooms with good ventilation.
Caution: Do not apply the Liquid Kit at temperatures below 10 ° C.
VOC value - 150 g / l
Thickness of a wet layer: about 80-100 μm.
Theoretical efficiency: 1 liter of UNI-SPRAY Liquid Kit can cover about 6 m² dry layer with a thickness of 100 μm.
Grey color
Cleaning of instruments: acrylic diluent or nitro diluent.

DRYING TIME

About 2 hours at 20 ° C. The drying time may be shortened if a higher temperature does not exceed 60 ° C for about 10 minutes.

PACKAGE

1,200 kg

>