The surface on which the irishedect effect will be applied must be strong, dry, clean and ready to be applied. Select the color ATF IRIDESCENTE in the catalog. Paint the "Fondo Iridescente" primer in the appropriate color by adding the specified amount of toner to the unpainted primer. Stir with a low-speed mixer until a homogeneous mixture is obtained. Apply two coats of the colored primer using a brush, roller or gun and the first coat of 25-30% with water, and second with 15-20%.
Allow the product to dry before applying the ATF IRIDESCENTE effect.
According to the chosen color, mix the indicated quantity of the powdered Perla De Luce with ATF IRIDESCENTE base. Stir with a spatula or a low-speed mixer, taking care not to damage the physico-chemical composition of the product. It is very important to distribute "Perla di Luce" very well in the product as it is in the form of powder.

Divide the wall into sections of 1 - 2 m² and start applying the brush effect. Before the surface is completely dry, retouch with a brush without paint. After about 5 to 10 minutes, smooth with a special plastic casing of CANDIS to give the ultimate effect of pearl decoration on the surface. Continue to decorate the entire wall following the same procedure.
ATF IRIDESCENTE is a tested and patented product (Patent No. E93830019.1 / I01285051).

 

95 - 140 g / m² per coat

Contact: 2-3 hours, full drying: 20-25 days