The effect of Milletoni-Preziosi is suitable for indoor applications on new and old-painted walls. The surface must be sound, dry, clean and ready for application. To optimize the absorption of the material from the wall, use primer. Apply Fondo ATF Bianco - White Effect Primer to the surface, using a brush, roller or gun, and the first coat of 25-30% with water, and the second with 20-25%.

• Milletoni
It is advisable to divide the wall into sections of 1 - 2 m² and apply the effect gradually, in order not to dry the material. If you chose one-color decoration, add 1 toner (for 2.5 l) to the Ori & Argenti Base. Stir with a low-speed mixer or spatula, taking care not to damage the physicochemical condition of the product until a homogeneous mixture is obtained. The application is done with Candis' gray plastic trowel. If you chose a two or more color decoration, divide the Ori & Argenti uncoloured base into two or more pieces, respectively, and color each part with a different toner. Mix each base with a low-speed mixer or spatula, taking care not to damage the physicochemical condition of the product until a homogeneous mixture is obtained. On the entire surface of Candis' gray plastic trowel, spread out all the dyed bases and apply them on the wall. Continue to decorate the entire wall following the same procedure.
 

• Preziosi
It is advisable to divide the wall into sections of 1 - 2 m² and apply the effect gradually, in order not to dry the material. On the entire surface of Candis' gray plastic trowel, distribute the material as follows: the Ori & Argenti colored base with selected toner, then one of the 6 Preziosi finished bases and finally the Ori & Argenti colored base with another selected toner. Apply to the wall with symmetrical and repetitive movements. Distribute the material evenly over the surface with a clean trowel. Continue to decorate the entire wall following the same procedure.