Interior white fine coat of plaster for manual application on pre-primed BK-primer old plasters and concrete surfaces. BK-GletEx is a mineral-based powder coating for thin-wall leveling of internal wall surfaces. It is used for manual application at a maximum thickness of 4 mm.

The surface to be applied must be solid, clean and dry, free of greasy stains and other similar surfaces.
Suitable bases are all lime-cement surfaces and gypsum lime (at least one month), concrete surfaces (at least one month), fibrous cement and gypsum boards, surfaces that allow good adhesion, water-insoluble dispersion paints. The base must be dust-free before work and if it is dusty it should be covered with BK-Podloga. If there are strong absorbent surfaces, impregnation with BK-Podloga or BK-Nivelator is recommended.
If the painted surfaces are covered with oil paints, lacquers and the like, it is necessary to completely remove existing paint layers.

Approximate cost: 1-1.5 kg / m²

The second layer is applied after the first one is completely dry, which after 6-8 hours under normal conditions (T = + 23-25 ​​° C, relative humidity of the air = 50-60%).

The mixture is prepared by slowly adding the powdered product and approx. 36% water (approximately 9 l water for 25 kg putty or about 1.8 l water for 5 kg putty), stirring continuously with an electric stirrer until the mixture is moistened evenly and homogenized. Then leave for 10 minutes and re-mix and, if necessary, add some water to obtain the proper consistency.