Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi Surface Paints, liquid glass and spray

Paints, varnishes and adhesives for wood / Hot Melt Edging Adhesives /

Decomelt 4050



Decomelt 4050


product_code:

Description:

DECOMELT 4050 is a hot melt adhesive developed for use on automatic edge banding machines for gluing wood veneer, melamine, PVC and ABS edges. DECOMELT 4050 provides flexibility to use one adhesive for all type of applications. DECOMELT 4050 is clear and provides very good adhesion at low quantity. DECOMELT 4050 has high heat resistance, good flow and wetting characteristics. DECOMELT 4050 solidifies rapidly right after the application which prevents staining on edge bands and accumulation on cutter blades. DECOMELT 4050 is suitable for adhering edge bands with different widths from 0,40 mm to 2 mm.
 

 

TYPICAL PROPERTIES

Appearance                                                           Granular
Base                                                                      EVA Copolymer
Color                                                                      Opac off-white                    
Viscosity @ 220 °C (Brookfield RVT Sp. 29)         31.000 mPa.s                                    
Viscosity @ 200 °C (Brookfield RVT Sp. 29)         53.000 mPa.s                                    
Softening Point (ASTM E28)                                  111 °C
 

APPLICATION PROPERTIES

Application pressure should be right and must be evenly distributed during bonding. Inadequate pressure may cause defects in bonding.
In case of prolonged machine-stops, the temperature of the adhesive shoul be decreased at least 30 - 40°C.
Check the temperature of the spreading roller frequently and make sure that the temperature corresponds to the value on the machine thermometer. Flactuations in application temperature, which can be either lower or higher, may affect bonding.
Check the quality of the bonding frequently. If new materials are used, it is highly suggested to make preliminary tests before proceeding continuous production.
The temperature of the materials to be bonded should not be lower than 18 – 20°C and the humidity should be in the range from 8 to 12%. Regarding these values, particular attention should to be paid during working in the cold periods of the year.

           
 

APPLICATION METHODS

Operating temperature on the application roll     180 - 200°C
Quantity of the glue                                             100 - 200 g/m2    
Minimum feed speed                                           >12 m/min 

PRODUCT HANDLING – STORAGE – SHELFLIFE
Product is packed in 25 kg kraft bags. Store in a dry and cool place preferably between 10 °C to 30 °C. Keep away from heat sources and close the containers after use to prevent dust contamination. Product can be stored minimum for 24 months under recommended storage conditions. Apply stock rotation as to use the oldest material first.