Water repellent grouting compoung - Flex fuga

product_code:

Description:

Cement based, decorative grout for ceramic and tile joints up to 6 mm.

 

AREAS OF APPLICATION

Use for filling joints of faience tiles, ceramic and similar materials.

TECHNICAL SPECIFICATIONS

According to TS EN 13888 European common regulatory framework:
Reduced water absorption (after 30 minutes) (5 g
Reduced water absorption (after 240 minutes) (10 g
Pressure resistance ≥ 15 N / ²
Bending resistance ≥ 3.5 N / mm²
Application time Max. 1 hour
Hardening time 12 hours
Wait at least 24 hours before putting the floor into operation.
The above figures are valid for 23 ± 2 ° C temperature and 50 ± 5% relative humidity.
The weather decreases in thermal conditions and increases for colder ones.

SPECIFICATIONS

Use in the range of 1-6 mm, water resistant, adheres well, does not drop, stain resistant. Available flowers: white, beige, ivory, blue, gray, green, pink, caramel, brown.

APPLICATION

Clean the dirt and leave materials from the joints using a wire brush before it appears. Add 6-7l. water to 20kg cut and stir. Leave the prepared mixture for 5 minutes. follow the mixing and divide again for about 1-2 minutes. before application. Fill the joints with the mixture, using a plastic trowel with average and transverse movements. Remove the remnants of the surface with a damp cloth, waiting 15-20 minutes. respectively nanoscale Wednesday temperature. Smooth and polish with a dry cloth after the mixture dries. ATTENTION!
Do not add more water than exactly what can be allowed. sinking and falling.
The air temperature is +5 ° C and +30 ° C.
Avoid wearing in direct sunlight.
Moisten the joints before use.
COST
Ceramic size Joint width Consumption
10 cm x 10 cm 3 mm, 4 mm, 6 mm 800 g / m2, 1000 g / m2, 1500 g / m2
20 cm x 20 cm 3 mm, 4 mm, 6 mm 400 g / m2, 500 g / m2, 750 g / m2
30 cm x 30 cm 3 mm, 4 mm, 6 mm 250 g / m2, 300 g / m2, 500 g / m2
Cost rate is approximate. As there will be a different number of pores and holes on the surface, this consumption can be determined only at the end of the application.

STORAGE

It can average an average of 1 year on a dry Monday in unopened packaging.

PACKAGING

1 kg bag