Can be used as an interior coating for the walls, roofs, gross concrete and wooden surfaces and all kinds of new or old painted surfaces.

Clean any dirt, oil, swollen paint and dust on the surface and correct any surface impurities using SAN DECO Acrylic Putty Interior.
First surfaces should be applied with SAN DECO Decoprimer. It is advised to use the same color of primer with the selected product color.

EFFECT WIND is a product, which is applied on the EFFECT WIND UNDERCOAT. Effect Wind Undercoat which chosen according to color chart, should be thinned with 5-10% clean water and be applied with 2 layer, using roller or brush. 4-5 hours should be allowed between each coat. l EFFECT WIND is applied with a special application tool consisting of dual headed brushes after drying of Effect Wind Undercoat. Dual headed brushes dived into the Effect Wind packages, which are chosen two different colors. The application technique is based on applying the product in all directions on the wall without overlapping two colors with alternative brush touches. Before the product starts drying, the grain particles inside will be spread by wooden brush applying cross touches. l The environment of application must be kept between +5 °C to +35 °C within 24 hours during and after the application.

Depending on the surface smoothness, its porosity and the application methods, for a single coat application:
- 1 covers 10 – 12,5 m² of surface
- The paint consumption for 1 m²  area is 80 – 100 ml.

Allow 5-6 hours for touch dry and 24-48 hours for complete dry at 23 ° C environment conditions

It should be stored for 1 year in a sealed package, cool and dry place and protected from direct sunlight; at a temperature between +5 °C and +35 °