BUILDING MATERIALS
GYPSUM PLASTER
STONE WOOL
XPS THERMAL INSULATION BOARD
BUILDING INSULATION PRODUCTS
DOWELS AND MESH FOR THERMAL INSULATION
MULTI SURFACE CHALKY PAINTS
СТЪКЛОФИБЪРНИ МРЕЖИ
DECORATIVE PAINTS
PAINTS AND VARNISHES FOR WOOD
GLUES AND WOOD FOR PARQUET
GLUES AND VARNISHES FOR PARQUET
GLUES FOR PARQUET
ADHESIVES FOR WOOD AND EDGING
PROTECTIVE COATINGS
PRIMERS AND PAINTS FOR WROUGHT IRON
GOLD, SILVER AND COPPER CHEMICAL BASED AND WATER BASED PAINT
PASTES AND SPONGES FOR POLISHING
POLISHING AND DETAILING PRODUCT
AUTOREFINISHING PRODUCTS
ABRASIVE MATERIALS
ADHESIVES FOR CAR GLASS
COLOR SPRAYS FOR CAR MAINTENANCE
POLISHING PAD
SPRAY BOOTHS
SPRAY BOOTHS FILTERS
DECORATIVE PLASTER TOOLS
Styrofoam Mouldings
MASKING TAPE
EPOXY RESIN
ALUMINUM PROFILES AND CORNERS
CEILING SYSTEMS
DRY BUILDING SYSTEMS
ADHESIVES, FUGENFUELER AND PUTTY
XPS and STONE WOOL
SPRAY GUN
FIBERGLASS MEESH
CONSTRUCTION PROFILES AND CORNERS
THINNERS
INDUSTRIAL FLOOR COVERING
EPS
PAINTS, OILS AND VARNISHES FOR WOOD
INDUSTRIAL FLOOR COАТING TOOLS
МАГАЗИН
ул. Промишлена бл. 429 магазин №18
Овча Купел 1
GSM: 0896 669 071
понеделник - петък: 8.30-18.00 ч.
събота: 8.30-15.00 ч.
----------------------------------------
За технически въпроси:
Веселина Джапунова, GSM: 0896 669 071
veselina.dzapunova@adacolor-bg.com
-
СКЛАД
ул."Андрей Германов" №6
Модерно предградие / Обеля
GSM: 0896 663 042
АВТОРЕПАРАТУРНИ МАТЕРИАЛИ & АНТИКОРОЗИОННА ЗАЩИТА
ул. "Брезовско шосе" №176
тел: 0895 447 503; 089 666 3056
gergana.shuteva@adacolor-bg.com
понеделник - петък: 8.00 -17.30 ч.
събота: 8.00 -14.30 ч.
СКЛАД: СТРОИТЕЛНИ МАТЕРИАЛИ & ДЕКОРАТИВНИ МАЗИЛКИ
тел: 0896 663 056 ; 089 666 3044
emiliya.mutafova@adacolor-bg.com
бул. „Княгиня Мария Луиза“ 71
район: Източен
те: 0897 566 663 / 089 032 1558
събота: 8.00 -15.00 ч.
МАГАЗИН И СКЛАД
ул."Уста Кольо Фичето" №25
Западна промишлена зона
GSM: 0896 669 079
понеделник - петък: 8.00-17.30 ч.
събота: 9.00-14.30 ч.
ул. "Клокотница" №1,
срещу Айше Молла чешма
тел: 0361 / 22 147 ; 0895 750 749
събота: 8.00-14.30 ч.
ул. "Македония" №49
кв. Балкан
GSM: 0896 669 079 ; 0896 734 489
събота: 8.00-14.00 ч.
Южна индустриална зона
ул. Околовръстен път №5 / след: ДАИ
GSM: 0896 663 051
кв. "Добруджански"
инд. зона: база на СТРОЙКОМПЛЕКТ
GSM: 0894 551 685 ; 0896 663 043
Map
В Избраното от вас населено място няма офис на куриера
ЗА ВРЪЗКА С НАШ КОНСУЛТАНТ: 0896 663 051 / 0896 663 046
Two component putty, designed for filling hollows and unevenness. Thanks to the use of light fillers 1L of the filler weighs 1,25 kg (1L of a traditional putty weighs 1,65 kg). It forms coats of good adhesion to primed and plain surface. It has a lot of flexibility, which makes it possible to use it on elements subject to mechanical vibrations. It can be applied on large surfaces, it does not flow down or shrink while curing. It is resistant to temperature range between -30˚C and +80˚C.
It has very good filling qualities as well as good adhesion to the surface. It has very low elasticity and therefore can be used on relatively small surfaces. Ideal for a lower layer on which other layers of paint are applied. It is indispensable for repairing boats, caravans and more.
- Steel - Aluminum - Two-component acrylic primers - Old painted surfaces - Polyester laminates Caution: Do not apply directly onto primers, single-component acrylic or nitrocellulose products.
Fiber whale 100 parts Hardener 2-2.5 parts
Carefully mix components according to their ratio. Apply on cleaned and degreased surfaces. Apply layers with a thickness of 4-5 mm with a spatula. Once you have applied one coat, wait for a while to harden. If you treat an aluminum surface, you must first matt it with a non-woven cloth. Caution: Do not apply the fibrous kit at temperatures below 10 ° C.
About 20 minutes at 20 ° C. The drying time can be shortened if a temperature of 60 ° C is maintained for about 10 minutes.
1 lt