Description:

Interior decorative plaster with pearl beads based on acrylic copolymer binder, designed for finishing decorative coating in interiors. It is easily applied with a brush, allowing the creation of a variety of decorative textures and effects.
Color: Silver, White, Gold, Metallic - can be tinted using a tinting system.
Coverage: 7-9 m²/l
Drying time: Touch dry: 4-5 hours / Fully dry: 24 hours
Shelf life: 2 years
Packages: 1 l / 2.5 l

CHARACTERISTICS
Water-based decorative plaster with high vapor permeability, which allows the surface to breathe. Gives a bright, pearly and textured appearance.

AREA OF APPLICATION
After cleaning and preparing the surface, the decorative plaster - PERLA can be applied to old painted surfaces, concrete, gypsum, cement plaster, cement boards and wooden surfaces.

APPLICATION
The decorative plaster is applied to the prepared surface with a brush, the desired decorative effect is also formed with a brush before the plaster dries.

SURFACE PREPARATION
Preparation and application in case of unevenness or old crumbling coatings:
1. The surface must be thoroughly cleaned of dust, grease or other dirt.
All old crumbling or unstable coatings must be completely removed.
2. Applying a concrete contact primer to strengthen the base, for better adhesion and to provide a more stable surface for subsequent coatings.
3. Leveling with a fine polymer putty, if necessary. In case of irregularities, cracks or other defects on the surface after priming, they must be filled and leveled to achieve an even and smooth surface.
4. Sanding the putty to obtain a smooth coating. After the putty is completely dry, the surface is sanded with suitable sandpaper or a grinder. The sanding dust must be removed.
5. Applying a primer for decorative plasters. On the sanded and cleaned surface for a stronger base and good adhesion, a primer for decorative plaster is applied, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
6. Applying the decorative plaster. After the primer has dried on a smooth surface without defects, the decorative plaster - PEARL can be applied.

Preparation and application on a solid and even surface:
1. Applying a primer for decorative plaster, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
2. After the primer has dried, the final application of the decorative plaster - PEARL is carried out.

IMPORTANT INSTRUCTIONS
Before use, the plaster must be mixed well until a homogeneous mixture is obtained.
It is applied at a temperature of +5°C to +35°C.
The surfaces must be dry and clean. Application is carried out according to the application information on the label.
Treated surfaces must be protected from mechanical impact for 3 days and from rain, snow, frost or high temperatures for 24 hours.
After each application, clean brushes, rollers and tools with water.