General data White mural paint with thermo insulating effect. Touching the dry film of the paint there will be a sense of warmth right away, owed to the low exchange of warmth with the wall. This means that the temperature on the surface differs from the one on the inside of the wall, respect to which it is some degrees higher. This effect sensibly reduces the condensate and allows a lower heat dispersion to the outside. If then the condensate phenomena is so imposing you cannot completely avoid it. Furthermore the product has following characteristics:
• good hiding power
• sound-absorbing power
• anti-condensate power
• transpiring power
Recommended paintingcycles

Apply one coat of Biosistem Fixative 2340.0250 diluted up to a maximum of 1:15 with water, depending on the wall absorbing capacity.
On a dry wall, application of two coats of Anti-mould Latex paint 2200.0050 outstripped of 4 - 8 hours depending on the room temperature and on the air humidity.
NEW OR PREVIOUSLY PAINTED WITH WATER BASED PAINTS WALLS, BUT WITH THE PRESENCE OF MOULD Treat with Biosistem spray 2340.0200. If the mould is abundant repeat the treatment about 20 minutes later.
Apply one coat of Biosistem Fixative 2340.0250 diluted in ratios up to 1:5 with water
When the wall is dry, apply two coats of Biosistem Anticondense Latex Paint 2200.0050, and wait 8 hours within the two coats.
In case of old lime, glue or mineral colours based colours, you need to completely remove them. The hardened spots of 2200.0050 can be easily removed with the Nitro Thinner 9210.0012.