Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi-acrylic chalk paint

Foams, silicones, adhesives / Sealants and Silicones /

​P.38 - Bitum Sealant



​P.38 - Bitum Sealant


product_code: P.38/310 мл.

Description:

Bitum Sealant is a solvent-based plasto-elastic bituminous sealant, reinforced by fibres, for gluing and reparations on bituminous surfaces. After curing a permanent flexible mass is formed.
Color: Black

Technical data sheet
Safety data sheet
 

PROPERTIES

Immediate and permanent adhesion on all common construction materials (such as brick, concrete, lead, zinc, tiles, isolation panels, certain plastics, etc…)
Can be applied under humid conditions.
It is thixotropic and therefore cannot drip, flow or spill and makes no threads.
Free from asbestos.
Remains flexible after processing and vulcanization.
Resistant to moisture.
Economic in use.
Inflammable (when used properly).
Highly insulating.
Protects against rust and moisture.

TECHNICAL PROPERTIES 

 Basis  Bitum
 Curing System  Neutral, physical drying
 Density  1.25± 0.02 g/ml                 (ASTM D 792)
 Skin formation  30 min. (23°C and 50% R.H)
 Curing Rate  0,5-1 mm/day (23°C and 50% R.H)
 Consumption  450 g/m2
 Application Temperature  +1°C to +30°C

SHELF LIFE

12 months if stored at room temperature.

Application

Waterproof sealing of joints, seams, chimneys, ventilation tubes, drainpipes, etc.
Adhesive for synthetic materials, tiles, concrete, rubber, insulating panels etc.
Sealing seams in wooden ships or boats.

INSTRUCTIONS

All surfaces should be free from dust or grease. On humid surfaces or in special cases, a preliminary adhesion test is recommended.
To be applied with a spatula or by means of a cartridge. It should be applied in strips or spots, for a good evaporation of the solvent.

Restrictions

It cannot be painted with paints on solvent basis.
Can only be used for synthetic materials without softener.
Contact with mineral oils softens the product.

PACKAGE

310 ml