Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi Surface Paints, liquid glass and spray

Foams, silicones, adhesives / Foams /

P.10 Foam



P.10 Foam


product_code: P.10

Description:

Multi-Purpose PU Foam is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gases that are harmful to the ozone layer.

Technical data sheet
Safety data sheet
 

PROPERTIES

Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
Excellent mounting capacity and stability.
Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.
Mold-proof, water-proof, over paintable.
Cured foam dries rigid and can be trimmed, shaped and sanded.

TECHNICAL PROPERTIES

 Basis  Polyurethane Prepolymer
 Curing system  Moisture cure
 Specific Gravity  22±3 Kg/ m3                                     (ASTM D1622)
 Tack-Free Time (1 cm width)  7±3 min                                            (ASTM C1620)
 Cutting Time (1cm width)  30-45 min                                         (ASTM C1620)
 Cure-Time  24 hours
 Foam Color  Light yellow
 Yield  30-45 L                                             (ASTM C1536)
 Fire Class of the Cured Foam  B3                                                     (DIN 4102-1)
 Thermal Conductivity  0,036 W/m.k (at 20°C)                      (DIN 52612)
 Compression Strength  0,03 MPa                                          (DIN 53421)
 Dimensional Stability  ±10%                                                 (ISO2796/86)
 Water penetration  0                                                        (ISO2896-87)
 Water Absorption  max. 1 vo.l%                                     (DIN 53428)
 Tensile Strength  7,6 N/ cm2
 Can Temperature  min.5°C max. +30°C
 Temperature Resistance  -40°C to +80°C
 Application Temperature  -2°C to +30°C
The results were obtained by providing optimum environmental conditions. 

SHELF LIFE

15 months if stored properly.

Applications

Fixing and insulating of door and window frames.
Filling and sealing gaps, joints and cavities.
Filling of penetrations in walls.
Insulating electrical outlets and water pipes.

INSTRUCTIONS

Optimal can temperature is +20 °C. Application (ambient) temperature is between -2 °C to +30 °C. Shake the can well before use. Screw the adapter on the valve. Hold the can upside down and activate the foam by pressing the valve. Moisturizing the surfaces and the foam improves adhesion and shortens curing time. Fresh foam can be cleaned by Akkim Foam Cleaner. Cured foam can be cleaned barely mechanically.

Restrictions

Storage above +25 °C and below +5 °C shortens shelf life.
Should be stored and transported in vertical position.
Should be kept in room temperature for at least 12 hours before the application.
Cured foam will discolor if exposed to ultraviolet light.
Paint or coat the cured foam for best results in outdoor applications.
Lower temperatures decreases yield and curing time.

SAFETY

Contains Diphenylmethane-4,4'-Diisocyanate. Harmful by inhalation. Irritating to eyes, respiratory system and skin. Do not breathe spray/vapor. Wear suitable protective clothing and gloves. Use only in well-ventilated areas. Pressurized container. Keep away from direct sunlight and do not expose temperatures over 50 °C. Do not pierce or burn, even after use. Keep away from sources of ignition, no smoking. Keep out of the reach of children.

PACKAGE

750 ml/850 gr