Продукти

Интериорни бои, Фасадни бои, Грундове и други

Смеси за лепене, фугиране и шпакловане

Инструменти, лични предпазни средства, аксесоари за строителство и ремонт

Топлоизолационни продукти

Лепила, фугини и система за нивелиране на плочки

Хидроизолационни продукти

Сухо строителство

Профили, ъгли и аксесоари за строителство

Декоративни мазилки

Лепила и лакове за масивен паркет

Монтажни лепила, силикони и полиуретанови пяни

Антикорозионна защита

Бои, лакове и лепила за дърво

Авторепаратурни материали

Епоксидни подове и пътна маркировка

Бояджийски камери

Грундове, блажни бои, 3в1 бои, импрегнатори, лазурни лакове, лакове за дърво и разредители

Индустриални бояджийски камери

Фасадни декоративни панели, профили и орнаменти

Каталози

  • (5)3М
  • (1)BETEK
  • (2)RAL И NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Сертификати

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)БЕТЕК
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Мултифунционална боя, течно стъкло и спрейове

Decorative paints CANDIS / Le Moderne /

Dàlumak



Dàlumak


Продуктов код:

Описание:

Dàlumak is a decorative product belonging to the Le Moderne family which is part of the Antiche Terre Fiorentine range by Candis. It is water-based and breathable, and is obtained from carefully selected raw materials. Dàlumak is proposed in 5 different Base versions (Red, Orange, Grey, Aqua and Brown) to which Candis colouring toners may be added.

Техническа характеристика
Информационен лист за безопасност
 
The application cycle is as follows: if necessary, start by applying a coat of Candis Primer diluted with water according to a 1:6 ratio, then apply two coats of White ATF Base  (Fondo ATF Bianco)  , and then, when the base has dried properly, apply a finishing coat of Dàlumak using a brush and the grey plastic trowel by Candis.
 
The 5 Bases (as shown on the catalogue) may be applied directly to the wall without adding any colorant. However, if desired, to each of the five Bases you can add a colouring toner from the Candis line, according to the instructions given in the catalogue, and thereby create countless different tints.
 
The toner mixing ratio is: the quantity of colour toner specified in the catalogue per 2.5 litre can of DÀLUMAK Base.

 


 
Prior to proceeding with the application of Dàlumak, make sure that the White ATF Base is perfectly dry.
 
Dàlumak neutral bases must be stirred before use. If you want to add colour toner to one of the 5 neutral bases, use the amounts specified in the catalogue. Pour the chosen toner into the base and mix the product thoroughly, either manually or with a store type mechanical mixer set to low speed.  Keep mixing for a few minutes until the colour is perfectly homogeneous.
 
After a few minutes (this length of time is indicative, depending on the greater or lesser absorption capacity of the wall, local climatic conditions, etc.), and in any event before the area painted previously has dried up to the point of not being workable, smoothen the area with the plastic trowel by Candis until you obtain the desired decorative effect.

Using a brush and a trowel, cover another 1-2 m² area adjacent to the first, and go on applying the product until you have covered the entire wall.
 
Upon being first applied by brush, DÀLUMAK looks like any regular interior colour paint. Then, when smoothed with a Candis plastic trowel according to the modalities described above, the product changes its appearance as if by magic, revealing the high aesthetic and decorative potential built into DÀLUMAK.
 
It is perfectly normal, it being an intrinsic feature of the product, that even when fully dried and polymerised, upon being exposed to any stress (e.g., hit by a piece of furniture, furniture rested against the wall, repairs, etc.), Dàlumak continues to develop its characteristic decorative pattern at the point of impact/rubbing.
 
We recommend that you do not apply the product in horizontal or vertical strokes, but rather use broken, uneven strokes.
 
Do not stop or start from the middle of the wall, always proceed from one corner of the room to the opposite corner.
 
On account of its covering power, the product can be painted over right away, which means you may touch up any imperfection immediately as well as mask overlapping colour and/or decorative effect areas.


 
> > > > > > > >