It is used on new internal walls and ceilings on a mineral base, as well as on old painted surfaces with faded colors.
Application. The surface on which the latex will be applied must be sound, dry, clean and ready to be applied. For cement-based surfaces, 28 days should be allowed before the latex is applied. Prior to application, the surface should be cleaned from weak and loose areas using a scraper. For highly absorbent or gypsum surfaces, use the Fawori Gypsum Primer Colorless Primer. On surfaces that are old-painted or on plasterboard and others. use the Fawori Interior Primer White Primer. During application, the surface temperature and ambient temperature should be between + 5 ° C and + 30 ° C. Apply by brush, roller or spraying.

When applied by brush or roller, dilute with 20% maximum of water and apply two layers. When spraying - up to 10-15% of water and apply one coat.

(at 20 ° C and 65 HR): Initial drying: 30 minutes. The second layer is applied after 2 hours. Full drying: 24 hours.

110-150 g / m² for a single layer, depending on the smoothness and surface absorption capability. To determine the final cost, make a test run.

3.5 kg, 10 kg, 20 kg