Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi-acrylic chalk paint

Tile adhesives, grouts and leveling system / Ceramic tiles adhesives /

White elastic adhesive for Class C2 T - SiproFix BK 160 White



White elastic adhesive for Class C2 T - SiproFix BK 160 White


product_code: 13521/25 кг

Description:

White quick-drying flexible cement based on white cement for laying faience tiles, granite tiles, terracotta, marble, granite, glass mosaic tiles and stone on floor and façade surfaces for interior and exterior. Add 26-28% water and apply 4-6 mm thick on pre-soaked surfaces. Suitable for bonding to surfaces with pre-existing tiles as well as floors with floor heating and saunas.

Technical data sheet
 

SURFACE APPLICATION

The substrate to which the adhesive is applied must be solid, clean, durable, non-frozen, free from efflorescence, oil residues or paint. Before bonding the tiles, it is advisable to apply the BK-Bond primer diluted according to the instructions in order to improve the adhesion of the adhesive. 

APPLICATION

The preparation is performed by adding the powder to about 26 -28% of water with vigorous stirring until complete homogenization. Allow the compound to rest for about 10 minutes, then stir again to obtain a suitable density of adhesive. Apply the adhesive using a serrated trowel with a suitable tooth size so that at least 65% of the surface of the tile is covered with adhesive (for interior use) and a minimum of 90% (for exterior use). The size of teeth depends on the size of tiles (4-6 mm optimal for tiles size 10-25 cm). Press in the tiles into the adhesive layer on the substrate, and if the surface is uneven or the tiles are of larger size, apply the adhesive also to the tile. The tiles should be laid while the adhesive is fresh (before the crust is formed). In the case of bonding of marble and other types of stone, subject to discoloration, do not immerse the lining in water at all, and it is advisable to apply a test application of adhesive. See product datasheet for more detailed instructions.

CONSUMPTION

Approximate cost: 3 - 5 kg/m²

DRYING TIME

Under normal conditions, 24 hours of drying are required before grouting. Under normal conditions it takes 7 days for the surface to be fully functional

PACKAGING

25 kg

> > > > > > > > > >