NEW SURFACES OR THOSE PREVIOUSLY PAINTED WITH WATERBORNE PAINTS BUT WITH EVIDENCE OF MOULD Treat the surface with 23410200 Biosistem Spray. Leave it to be absorbed for 2-3 hours and then wash with water. If the surfaces are particularly blackened, the treatment can be repeated 3-4 hours after the first. For a better preventive action, treat the surface with 23410230. Biosistem Titansan; in this case wait at least 24 hours after the application of 23410200 Biosistem Spray. Apply 23410230 Biosistem Titansan exclusively with a roller or brush, leave to act for 24-48 hours, keeping the rooms ventilated. The treatment can be repeated several times to achieve improved penetration into the surface and, therefore, greater effectiveness. Complete the painting cycle with 23400250 Biosistem Fissativo (if needed) and with one of the Biosistem anti-mould waterborne paints.

Do not allow to freeze, store at + 5°C and + 20°C

Supply and application of Biosistem Titansan by brush, on walls and ceilings; disinfesting treatment for walls contaminated by moulds, fungi, mosses and algae. The product needs to be applied until the contaminated surface is fully saturated. Leave the product to act for 24-48 hours and subsequently wash by hand or with water-jet cleaners. Including costs for the protection of areas not to be treated, transport and disposal of residual materials