Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi-acrylic chalk paint

Glues and varnishes for parquet / Water based varnishes for parquet /

Greenol supra parquet varnish



Greenol supra parquet varnish


product_code:

Description:

Water-based one component varnish for interior wooden surfaces and flooring

Technical data sheet
Safety data sheet
 

Solids content:

28-30 %

 VOC :

 Low solvent content (VOC), <5%

 Sheen (at 60°C) :

Silk matt 50%, Matt 25%, Extra Matt 10%

 Drying time, until :  

- Ready for sanding/recoating: 2-3 hours
- Light use: 24 hours
- Full hardness: 7 days (under normal climate conditions, 20°C/60% R.H.)

PREPARATION: 

 Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer to reach room temperature, insert filter and shake the container thoroughly before use. Optimal application conditions are between 18-25°C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13°C.

APPLICATION:

 Application tools:

Roller, Brush

 Application rate:

8-10 m2 /liter (120-100g/m2) per coat
1. Apply lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps.
2. Allow to dry properly before applying further layers of lacquer. Anticipate slightly longer drying time for each layer that is applied.
3. Make an intermediate sanding before the final coat using Bona Diamond Abrasives Grit 120 or similar. Remove any dust before applying the final layer of lacquer.

Note:

If exceeding 24 hours between coats, the surface should always receive a light intermediate sanding.
The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 5 days before covering with carpets or other floor coverings or loading with heavy objects. Also avoid damp mopping the floor during this time.

Cleaning:

Wipe tools free from residual material before cleaning with a minimum of water. Dried material can be removed with acetone.

Shelf life:

1 year from date of production in unopened original container

Storage/transport:

The temperature must not fall below +5°C or exceed +25°C during storage and transport.

Disposal:

Wastes and emptied containers should be handled in accordance with local regulations