BUILDING MATERIALS
ADHESIVES, POLYURETHANE FOAM, SILICONE
GYPSUM PLASTER
STONE WOOL
XPS THERMAL INSULATION BOARD
BUILDING INSULATION PRODUCTS
DOWELS AND MESH FOR THERMAL INSULATION
COLORIFICIO SAMMARINESE
TECHNONICOL
CONSTRUCTION TOOLS
DECORATIVE PAINTS
PAINTS AND VARNISHES FOR WOOD
GLUES AND WOOD FOR PARQUET
GLUES AND VARNISHES FOR PARQUET
GLUES FOR PARQUET
ADHESIVES FOR WOOD AND EDGING
PROTECTIVE COATINGS
PRIMERS AND PAINTS FOR WROUGHT IRON
GOLD, SILVER AND COPPER CHEMICAL BASED AND WATER BASED PAINT
PASTES AND SPONGES FOR POLISHING
POLISHING AND DETAILING PRODUCT
AUTOREFINISHING PRODUCTS
ABRASIVE MATERIALS
ADHESIVES FOR CAR GLASS
COLOR SPRAYS FOR CAR MAINTENANCE
POLISHING PAD
SPRAY BOOTHS
SPRAY BOOTHS FILTERS
FACADE PROFILES AND ORNAMENTS
DECORATIVE PLASTER TOOLS
THINNERS
Styrofoam Mouldings
MASKING TAPE
EPOXY RESIN
ALUMINUM PROFILES AND CORNERS
CEILING SYSTEMS
DRY BUILDING SYSTEMS
ADHESIVES, FUGENFUELER AND PUTTY
XPS and STONE WOOL
SPRAY GUN
FIBERGLASS MEESH
CONSTRUCTION PROFILES AND CORNERS
СКЛАД
ул."Андрей Германов" №6
Модерно предградие / Обеля
GSM: 0896 663 042
понеделник - петък: 8.30-18.00 ч.
събота: 8.30-15.00 ч.
АВТОРЕПАРАТУРНИ МАТЕРИАЛИ & АНТИКОРОЗИОННА ЗАЩИТА
ул. "Брезовско шосе" №176
тел: 032 940 456 ; 0895 447 503
понеделник - петък: 8.00 -17.30 ч.
събота: 8.00 -14.30 ч.
СКЛАД: СТРОИТЕЛНИ МАТЕРИАЛИ & ДЕКОРАТИВНИ МАЗИЛКИ
МАГАЗИН И СКЛАД
ул."Уста Кольо Фичето" №25
Западна промишлена зона
GSM: 0896 669 079
понеделник - петък: 8.00-17.30 ч.
събота: 9.00-14.30 ч.
ул. "Клокотница" №1,
срещу Айше Молла чешма
тел: 0361 / 22 147 ; 0895 750 749
събота: 8.00-14.30 ч.
ул. "Македония" №49
кв. Балкан
GSM: 0896 669 079 ; 0896 734 489
събота: 8.00-14.00 ч.
Южна индустриална зона
ул. Околовръстен път №5 / след: ДАИ
GSM: 0896 663 051
кв. "Добруджански"
инд. зона: база на СТРОЙКОМПЛЕКТ
GSM: 0894 551 685 ; 0896 663 043
Map
В Избраното от вас населено място няма офис на куриера
ЗА ВРЪЗКА С НАШ КОНСУЛТАНТ: 0896 663 051 / 0896 663 046
Two component putty, designed for filling hollows and unevenness. Thanks to the use of light fillers 1L of the filler weighs 1,25 kg (1L of a traditional putty weighs 1,65 kg). It forms coats of good adhesion to primed and plain surface. It has a lot of flexibility, which makes it possible to use it on elements subject to mechanical vibrations. It can be applied on large surfaces, it does not flow down or shrink while curing. It is resistant to temperature range between -30˚C and +80˚C. Color: White
It has very good filling qualities as well as good adhesion to the surface. It has very low elasticity and therefore can be used on relatively small surfaces. Ideal for a lower layer on which other layers of paint are applied. It is indispensable for repairing boats, caravans and more.
- Steel - Aluminum - Two-component acrylic primers - Old painted surfaces - Polyester laminates Caution: Do not apply directly onto primers, single-component acrylic or nitrocellulose products.
Fiber whale 100 parts Hardener 2-2.5 parts
Carefully mix components according to their ratio. Apply on cleaned and degreased surfaces. Apply layers with a thickness of 4-5 mm with a spatula. Once you have applied one coat, wait for a while to harden. If you treat an aluminum surface, you must first matt it with a non-woven cloth. Caution: Do not apply the fibrous kit at temperatures below 10 ° C.
About 20 minutes at 20 ° C. The drying time can be shortened if a temperature of 60 ° C is maintained for about 10 minutes.
1 lt