Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi Surface Paints, liquid glass and spray

Interior Paint, Exterior Paints, Primer and others / Interior and exterior primers /

High-coverage fine white primer - Pro primer



High-coverage fine white primer - Pro primer


product_code: 5082-0977-66-00001/3.5 кг , 5082-0977-54-00001/20 кг

Description:

White primer on acrylic-copolymer basis for internal use. Creates better adhesion and better coverage of latex and reduces paint consumption. Provides a strong bond between the latex and the surface.

Technical data sheet
Safety data sheet
 

Application Surfaces

Apply to mineral-based surfaces on old painted latex surfaces with faded colors.

Application

The surface on which the primer will be applied must be sound, dry, clean and ready to be applied. If applied on a newly laid plaster, it should wait for 4 weeks to dry the surface. During application, the surface temperature and ambient temperature should be between + 5 ° C and + 30 ° C. Avoid application in direct sunlight and strong wind. Apply by brush, roller or by single layer spraying. Prior to application, the surface should be cleaned of weak and loose areas using a scraper.

Dilution (by volume)

When applied by brush or roller, dilute with a maximum of 10% of water and a maximum of 5% water is diluted when spraying. Apply on one coat.

Drying time

(at 20ºC and 65 HR): Latexing: after 6 hours.

Consumption

135-220 g / m² per layer depending on the smoothness and surface absorption capability. To determine the final cost, make a test run.

Packaging

3.5 kg, 10 kg, 20 kg
> >