Application Surfaces

New interior walls and ceilings on a mineral base, concrete, plaster and walls that have been painted before and have lost color.

Consumption (per layer)

(60-80 ml / m²) or (95-125 g / m²) per layer, depending on the smoothness and absorbency of the surface. To determine the final cost, make a test run.

Application

The surfaces to be applied to the latex Betek Plus should be smooth, sound, dry, clean and ready for application. For internal mineral surfaces that are very low absorptive and do not emit dust or for non-dyed surfaces, it is necessary to use Betek Primer White Primer; on highly absorbent and dusty surfaces use Betek Gypsum Primer or 1/7 Concentrated Primer. During application, the surface temperature should be between + 5 ° C and + 30 ° C. Apply by brush, roller or spraying.

Drying time

Initial drying: 15 - 30 minutes. Layer 2: After 3-6 hours. Full drying: 24 hours.

Dilution

The product should be diluted with a maximum of 30% water (brush or roller).

Packaging
2.5 l, 7.5l