Prior to the application of BETEK CONTACT, all types of dirt, rust and oil that interfere with adhesion should be removed. Surfaces must be clean and dry. Depending on the desired consistency, dilute with at least 50% pure water and use a low speed mixer. Apply one coat of phasogen roller. The product is applied at regular intervals. The surface should dry completely before applying plaster or gypsum (approximately 24 hours). The temperature of the air and the surface should be between + 5ºC and + 30ºC. Apply with brush, roller or gun.

250 g/m² per layer depending on the surface. To determine the exact cost, you need to do a test run.

24 hours.

It can be diluted with up to 50% pure water.

Approximately 3 years in a cool, dry place protected from frost and direct sunlight in a closed vessel.

12 kg, 4 kg, 1.4 kg