The waterproofing material can be used for all horizontal and vertical surfaces and for all areas requiring waterproofing such as concrete, aerated concrete, etnithique, plaster, brick, briquettes, galvanized sheets, grooved and unfolded asbestos roofing tiles, terraces and roofs, bitumen paper. It is used for insulating windows, arches, pools, tanks, canals, etc.

Vertically about 0.750-1 kg./m², horizontally 1-1.5 kg/m², depending on the surface condition and unevenness. For final consumption, make a test run.

The surface on which the waterproofing material is to be applied must be thoroughly cleaned of oil, dust and old paint to avoid adhesion. Before the product is applied on concrete and plastered surfaces, it is advisable to rinse with a solution of 1 part hydrochloric acid and 10 parts water. Treated surfaces should be under a slight slope to avoid unnecessary accumulation of material. Use Betek Stako to level and smooth the floor. Apply at least two layers, each perpendicular to the previous. Wait for 24 hours between layer application. Apply fiber-based waterproofing material Betek Fibrous Aquaset to the areas where part of the product has been assembled to spread and remove. Surfaces treated with waterproofing material should be protected from rain, snow and frost for 24 hours. During application, the surface temperature should be between + 5 ° C and + 35 ° C and the humidity 65% ​​HB. A protective layer should be applied to the waterproofing material when applied to surfaces that are subject to mechanical shocks and which require high resistance to traces of shocks and shoe.

Initial drying: 12 hours. Apply the second layer: After 24 hours. Full drying: 48 hours.

When used as a primer, it is diluted with 100% water. When applying the second and last layer, the product is not diluted.

20 kg, 3 kg, 1 kg