Application Surfaces

It is used in winter in the case of pouring concrete or concrete solutions at temperatures up to -15 ° C to prevent freezing, as well as in places where rapid hardening of the concrete is required. (Templates and fittings must be protected from cold, the internal temperature of the concrete must be more than + 5 ° C).

Consumption

2% of the weight of the cement.

Application

The recommended ratio of the additive is to be 2% of the concrete volume. This proportion may vary between 1% and 3%, depending on the operating conditions and the desired curing time. It is advisable to use fresh and clean Portland cement. The dose should not be less than 300 kg / m³ (6 packs). Betek Friol is used by adding it to an already made plaster and water solution. If concrete is to be poured at low temperatures, precautions against freezing must be taken. The required concrete conditions are that the internal temperature of the concrete is at least + 5 ° C, the water for the solution, the inert materials and the templates to be heated, ensuring the thermal insulation of the concrete surfaces.
Spreading tools - Spatula, trowel, brush.

Packaging

20 kg, 5 kg.