It can be applied on plasters, cladding, scraped and plastered surfaces, mosaics, concrete surfaces, coarse concrete, MDF, OSB, as well as on surfaces that have been pre-painted.

90-140 ml/m² per layer, depending on the smoothness and absorbency of the surface. To determine the final cost, make a test run.

The surface must be cleaned of all types of mold, dust, dust and does not contain substances from previous products. Surface defects can be repaired with the Betek Stako cement mix or Betek Exterior Paste kit. If it is applied to soon-paved surfaces, it should wait for 4 weeks to dry. To prevent possible crystallization of salts, mix the Betek Boxan 451 Penetrating Impregnator with water in a 1: 1 ratio and apply it with a brush. Before priming or applying the phasgene, clean it with a wet brush in case crystallization is already in place. During application, the surface temperature should be between + 5 °C and + 30 °C. Protect from rain and frost during application and drying. Do not operate in windy weather and in direct sunlight. When applied with a brush and roller, dilute 10% with a maximum of water.

6 hours after applying the last layer.

15 l, 2.5 l