It can be applied on gypsum, concrete, rough concrete, worn mosaic, MDF, concrete slabs, pre-painted surfaces, and terrazide-coated surfaces.

100-160 ml/m² per layer depending on the smoothness and surface absorption capability. To determine the final cost, make a test run.

The surface must be sound, dry and suitable for application. Surface defects can be corrected with the Betek Stako cement mix or Betek External Paste kit. If it is applied to soon-paved surfaces, it should wait for 4 weeks to dry. To prevent possible crystallization of salts, mix the Betek Boxan 451 Penetrating Impregnator with water in a 1: 1 ratio and apply it with a brush. Before priming or applying the phasgene, clean it with a wet brush in case crystallization is already in place. Before applying the Beteksilan silicone faience, apply a white silicone primer Beteksilan Primer. Wait 4 weeks for next decoration. Application time should be taken into account when working with concrete surfaces. During application, the surface temperature should be between + 5 ° C and + 30 °C. Protect from rain and frost during application and drying. Do not operate in windy weather and in direct sunlight. Apply by brush, roller or spraying.

Initial drying: 1 hour. Apply the second layer: after 12 hours. Complete drying: after 24 hours.

The product should be diluted with 10% water (brush or roller).

Can be stored in its own packaging for 3 years in a cool and dry condition protected from frost and direct sunlight. Close the container hermetically as soon as it is applied.

15 l, 7.5 l, 2.5 l