Application conditions:

The temperature in the application room should be at least + 5 ° C. The surface must be clean of dust, greasy stains, etc. If the surface is dry and warm before applying plaster, the surface must be moistened. Plasterboard must be applied to the locations that connect the different materials. Control the smoothness of the surface to be treated! Smooth surfaces should be shredded before applying the plaster or pretreat with a material that makes it easier to adhere the surface to the surface. Concrete surfaces must be treated with a concrete primer "Betonkontakt".

Application:

Pour the mixture into the machine. Add water (ratio: 10 kg of machine plaster to 5.5 l of water) to obtain the required mix. The mixture should be used within 150 minutes. The plaster is laid according to the required thickness, but not to flow. After about 30 minutes it is aligned with mast. Where necessary, it fills and re-aligns with mast. About half an hour later, the surface was sprayed with water and splashed with a sponge. After another 10 minutes, a metallic circle is passed and a smooth surface is obtained. Before painting, the surface is treated with Satin finishing plaster. Technical specifications should be adjusted according to the workspace, climatic conditions and laying surface.

Specifications:

Dilution: 5.5 l of water, 10 kg of mortar for injection
"Open" time to work: 150 minutes
Flow diameter: 230-235 mm for a 1 liter container
Curing time: 300-320 minutes
Bending power: min. 10 kg f / cm²
Shrinking force: min 25 kg f / cm²
Consumption: 10 mm thick, 10.5 kg / m²
Thickness of application: max. 15 mm
Thermal conductivity: max. 0.35 W / mk

Storage:

Store in the manufacturer's packaging, on a pallet, in a dry place.

Package:

Polypropylene sack, 35 kg ± 2%