Features

The cured coating features good adhesion to the surface and good elasticity, and is also resistant to water, gasoline, grease and oil. Treated surfaces may be exposed to high temperatures (up to 90 ° C) for a short time.

Application Surfaces

Steel
Aluminum
Two-component acrylic primers
Polyester whale RANAL
Old lacquered surfaces
Wooden surfaces
Caution: Do not apply directly to aqueous primers, mono-acrylic or nitrocellulose products.

Mixing ratio

Polyester resin: 100 parts
Hardener: 2.5 parts
Caution: Do not return the product mixed with the hardener back to the packaging

Directions for use

Before applying the resin, the surface must be cleaned, rust removed and degreased. Prepare enough of the product to cover about 2 cm above the surface that is damaged. Stir the components carefully according to the mixing ratio. During operation, the temperature should not be lower than 15˚C. Apply the prepared resin to the surface using a brush, press and spread the resin. Lay the net - glass fiber, press until it is wet with resin. After curing the first layer (8-10 minutes), a second layer can be laid. Each layer of the net - a fiberglass - must be soaked with resin. After applying the last layer, wait about 50 minutes and start the surface treatment. Caution: Do not apply at temperatures below 10 ° C.
Recommended sandpaper for sanding: P80 - P120.
Color: yellow
Cleaning of instruments: nitro diluent.

Drying time:

About 50 minutes at 20 ° C. The drying time can be shortened if a higher temperature does not exceed 60 ° C for about 15 minutes.

Package:

1 kg

>