The Etnika effect is suitable for interior walls, covered with new as well as old plasters. The surface must be sound, dry, clean and ready for application. Prime the surface with Fondo ATF Bianco - White Primer for effects by using a brush, roller or gun, and the first coat of 20-25% with water, and the second with 15-20%.
Additionally, to achieve a deeper color, White Effect Primer can be stained with the same color selected for the finishing decoration in a 1 toner proportion every 2.5 liters. The type of finishing you selected determines the amount of toner in the White Primer:
For "Etnika" Base - Argento Antico / 2.5 l - 1 piece of coloring No. 36
For Etnika Base - Argento Light / 2.5 l, no dye is added
About Etnika Base - Bronzo Etnico / 2.5 l - 1 piece of coloring №44
For "Etnika" Base - Oro Antico / 2.5 l - 1 piece of coloring No. 36
For "Etnika" Base - Oro Rinascimentale / 2.5 l - 1 piece of coloring No. 38
For "Etnika" Base - Reme Fiammingo / 2.5 l - 1 piece of coloring №44
For Base "Etnika" - Rosso Puro / 2.5 l - 1 piece of coloring №43

Before proceeding with the decoration, make sure the White Primer is completely dry.
Pour the selected toner into the Etnia Base pack and gently mix with a spatula or mechanical mixer until it is completely mixed.
Using a Candis brush, distribute the decoration by working on alternating and crossed movements on surfaces of 1-2 meters.
The characteristic light-dark effects are obtained by going back to the decoration with a dry brush. Emphasis on the effect is achieved by smoothing the wall with the Candis spatula.
Finish the wall decoration by following the same procedure.

85 - 130 g / m² for a single layer

Contact: 2-3 hours, full drying: 20-25 days