All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000.
Primed Surfaces
Intergard 475HS should always be applied over a recommended anti-corrosive coating scheme. The primer surface should be dry and free from all contamination and Intergard 475HS must be applied within the overcoating intervals specified (consult the relevant product data sheet).
Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2Ѕ (ISO 8501-1:2007) or SSPC-SP6, Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch primed prior to the application of Intergard 475HS.
Zinc Primed Surfaces
Ensure that the surface of the primer is clean, dry and free from contamination and zinc salts before application of Intergard 475HS. Ensure zinc primers are fully cured before overcoating.
 

Material is supplied in two containers as a unit. Always mix a complete unit in the proportions supplied. Once the unit has been mixed it must be used within the working pot life specified.
(1) Agitate Base (Part A) with a power agitator.
(2) Combine entire contents of Curing Agent (Part B) with Base
(Part A) and mix thoroughly with power agitator.

Mix Ratio:

3 part(s) : 1 part(s) by volume

Systems compatibility:

Intergard 475HS is designed for use over correctly primed steel. Suitable primers are:
Intercure 200                           Interzinc 22 (mist coat or tie coat may be required)*
Intergard 251                          Interzinc 315
Intergard 269                          Interzinc 52
Suitable topcoats are:
Intergard 740                          Interfine 629HS
Interthane 990                        Intergard 475HS
For alternative primers and finishes, consult International Protective Coatings.
*See relevant product data sheet for details.

Storage:

12 months minimum at 25°C (77°F).
Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.