Application Surfaces

Product made of gypsum base, designed to fill and strengthen joints, for laying between gypsum boards and for filling irregularities between boards (screws, damage, etc.). The appropriate basis is
the surface of the gypsum board. However, the mixture can be used to fill small cracks on mineral substrates (surface layers, pre-painted surfaces, surface repairs, machined plaster, etc.).

Application

The surface to which the gypsum is applied must be solid, clean and dry,
without greasy stains and more.

Consumption

Approximate cost: 350-450 g / m²

Drying time

The drying time of the filler under normal conditions (T = + 23-25 ​​° C, relative humidity of the air = 50-60%) is approximately 12 hours.

Dilution

The mixture is prepared by slowly adding the powder to approximately 50% water (2.5 liters of water per 5 kg of powder), with constant mixing with an electric mixer until the mixture becomes completely homogeneous.

Packaging

5 kg