Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi Surface Paints, liquid glass and spray

Glues and varnishes for parquet / One-component primers and varnishes for parquet /

Nitrocellulose primer for parquet - Parquet filling varnish



Nitrocellulose primer for parquet - Parquet filling varnish


product_code:

Description:

Nitrocellulose primer for parquet varnish, which serves to fill the pores of wood. Surface drying and application of the second coat - after 20-30 minutes, if necessary, sand after 3-4 hours with sandpaper P220, then apply "BETEK PARQUET VARNISH".

Technical data sheet
Safety data sheet
 

Application Surfaces

It can be applied successfully on furniture and wooden surfaces, all kinds of MDF, solid wood and lined surfaces that are for internal use.

Consumption (per layer)

Depending on the surface and methods of application, an area of ​​8-10m2 can be covered with 1l. by Betek Parquet Filling Varnish for one coat. Number of layers to be applied: 2-3 layers, depending on the surface.

Application

The surface on which the primer for parquet varnish will be applied must be well cleaned from dust, oil and other impurities. If necessary, sanding with P220 sandpaper. Dilute with the Betek Cellulosic Thinner nitrocellulose diluent until the desired viscosity is achieved and apply. During application, the surface temperature should be between + 5 ° C and + 30 ° C. Apply with brush, roller or gun.

Drying time

Dry to touch: 20-30 minutes at 20 ° C. Possibility of polishing: After 3-4 hours.

Dilution

Dissolves with 50% Betek Cellulosic Thinner.

Packaging

12.5 l, 2.5 l
> > > > >