One-component, waterproofing coating for horizontal and vertical protection of surfaces from moisture. It is used for waterproofing of potentially damp rooms: kitchens, bathrooms, showers, swimming pools, basements, terraces, etc. It is intended for indoor and outdoor use, for positive and negative water pressure ≤1,5 bar. The material is not intended for surface finishing or for systems that are in permanent contact with water.

he substrate to which BK-HidroStop 1 is applied must be solid, dust-free, free of grease, mold and loosely bonded parts. Before applying waterproofing, it is advisable to apply the BK-Bond primer diluted according to the instructions. In case of old and unevenly absorbent substrates, as well as in the case of porous high absorbent substrates, it is necessary to coat the substrate with diluted BK-Bond, min. 4h before waterproofing. In case of peeled off, worn and/or dusty surfaces, all loosely bonded layers must be removed and then impregnated with BK-Penetrat. It is necessary to thoroughly wash the concrete surfaces with hot water in order to remove the impurities present and then coat with BK-BetonKontakt. The coating is prepared by mixing with about 30% of water until complete homogenization. Allow the compound to rest for about 5 minutes and stir again. Use prepared compound within 2 hours. The coating is applied by brush in two coats, by crossing motions, until the surface is completely covered. The thickness of one coat is approximately 1 mm, and the second coat is applied after the surface curing of the previous.
Waterproofing coating should be protected from rapid drying. See product datasheet for more detailed instructions.

Approximate cost: 2-2.5 kg / m²

Under normal conditions, 24 hours of drying are required before grouting. Under normal conditions it takes 7 days for the surface to be fully functional.

25 kg