Excellent thixotropy
Excellent gloss
Maximum yellowing resistance
High hiding power
Excellent leveling and surface hardness

It is used for furniture and decoration works for interior use,
to provide protection and decorative appearance on all kinds
of wooden surfaces such as massive and veneer. Especially
in areas such as bathroom cabinets, shower cubicles, doors
and kitchen. It is not recommended for outdoor use.

Product Type: Polyurethane
Viscosity
1.component (20°C, KU) :77 ± 5
Specific Gravity (kg/l)
1.component :1,290 ± 0,03
2.component :0,980 ± 0,03
Solid Content (% by weight)
1.component :75 ± 2
2.component :36 ± 1 (HP555)
Recommended Application: 130 - 140 (for one coat)
Weight (g/m²)
It depends on application method, seasonal conditions and surface properties.
Drying Time (20°C, 45-65 % RH, 100 g/m2, single coat)
Dust free :30 - 40 min
Touch dry :6 h
Stackable :72 h

To be applied on polyurethane, polyester or UV white basecoat which
are preferably sanded with 220-280-400 or 280-400 grit paper
respectively. The sanding process in this way is enough before the
topcoat application. If the extra sanding process applies, it must not
be greater than 600 gritpaper. If it is greater than 600 grit paper, it
must be checked adhesion properties on the surfaces.

Thinner - TA500: It can be preferred in hot and / or humid weather conditions.
Thinner - TP541: 2-5% can be added to thinned paint in summer.
Hardener - HP555: Can be used for fast drying
Hardener - HP695: Recommended for summer and spring season.

If the polishing process is made, it should be preferred two coat
application. It should be applied 130-140 g/m for single coat
application. Two coat applications for manual and automatic spray
process, 100 g/m for 1.coat and 130-140 g/m for 2.coat should be
applied. Wait minimum 10 maximum 20 minutes between coats for
manual application. Wait minimum 1 maximum 3 hours between coats
for automatic spray applications. The sanding process is not applied
between the coats. Vertical applications, 250-350 g paint per square
meter is applied in 4-5 equal parts. Wait minimum 10 maximum 30
minutes between coats. The polishing process should be waited at
least 18-36 hours. After 36 hours, the degree of difficulty increases
during the period for the polishing process.
Application Equipment
Conventional spray gun
Airmix Spray

Store in a cool, dry place and away from heat.
Close all containers after use.
Shelf life is 1 years if stored under specified conditions.

Product                      Product Code
PU Glossy Paint             BP695.00
Color                           Color Code
White                                 1000