The application surface must be cleaned out from every kind of dirt, stain, swelled paint and dust and then uneven surface must be corrected with SAN DECO Acrylic Putty Interior and primed with SAN DECO Decoprimer.

MIRZASTO should be mixed homogeneously without thinning. l MIRZASTO should be spread with a steel spud, slowly on 1-2 m² area.Then, according to the desired decorative effect, with a plastic or a steel spud, apply the product with untidy patterns on 10-15 cm length. Before MIRZASTO dries, smooth and striped patterns can be applied again with a steel or a plastic spud.Wait 4 hours at a temperature of 23 ˚C, (220/260) then use a grained sanding paper to wipe out the untidy bumps. Finally, 2 different colored EFFECT FINISH can be applied one after the other. Wait 2-3 hours between EFFECT FINISH coats.The temperature of the application environment must be kept between +5°C and +35°C during application and for 24 hours afterwards.

Depending on the smoothness, porosity of the surface and the applied method, for one layer:
The paint consumption for 1 m2 аrea is 350 – 450 ml .

Dry to touch: 4-5 hours, complete drying: 24 hours in a medium of 23 ° C.

Store in a sealed package for 1 year between 5 ° C and 35 ° C.