Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi Surface Paints, liquid glass and spray

Interior Paint, Exterior Paints, Primer and others / Interior and exterior primers /

Titancril acrylic sealer fixative for interior/decorative paint



Titancril acrylic sealer fixative for interior/decorative paint


product_code: 23400003L0016/1 л, 23400003L0026/4 л

Description:

Acrylic sealer fixative for walls. Ideal for treating bricks, absorbent plasters or old chalking paint, it is also effective for restoring the sheen of plastic coverings. Formulated for the acrylic coating cycle.

Technical data sheet
Safety data sheet
 

General data

Liquid product having milky appearance (composed by a acryl copolymer). After drying, its characteristics are:
• good plasticization grade
• good toughness
• total resistance to saponification
• high thinness of the particles that gives rise to high crosslinking and impreganating power
• high resistance to water

Technical features (data gathered at the temperatur Technical features e of 20°C)

Specific gravity kg/l 1,030 ± 0,030
Solids % 30 ± 2
Freeze/defrost stability Good
Theoretical spreading rate - average mq/l 15 - 20 (diluted 1:3 with water)
Film appaerance Gloss colourless
Thinner Code Water
Dust free Minutes 15
Dry in depth Hours 2-3
Over painting ore 4-6

Application modalities

For its application dilute the product with water in ratios ranging from 1 part of water per any part of Titancril, up to 5
parts of water per any part of Titancril, in according to the support absorption Add the diluting water in small quantities (mostly at the beginning), contemporaneously shaking until getting the wanted dilution.

Recommended painting cycles 

Generally one coat is enough, but for very absorbing surfaces (i.e. on scagliola/chalk) it may also be necessary a second coat to apply when the first one is perfecly dry (after 4 - 6 hours). The best application is by brush that particularly favours its penetration into the surface. However it may also be applied by roll. The minimum film temperature is +9°C. so the product is not to be applied below this temperature. Keep the product at more than 10° C. Tools can be cleaned with water, right after application.

Packing

1 lt, 4 лт