White coloured liquid product made of acrylic copolymers. Its semi-covering properties highlight already-painted areas making painting easier. Moreover, in case of simple works, it makes you save the application of one finishing layer. Once it has been applied, the product has a regular, semi-covering film:
• good film resistance;
• total resistance to saponification;
• very high particle smooth resulting in top penetration grade and consequently high level of impregnation and
insulation;
• high waterproof;
• high level of plasticization.

Ford cup viscosity 4 sec. 17 ± 3
Particle diameter Micron about 0.045
Ph (DIN 63785) 7.5 - 8.5
Stretching until breaking point at 23°C and
50% of relative humidity
% about 1,300
Specific gravity kg/l 1.150 ± 0.030
Solids % 36 ± 1 (at supplying viscosity)
Freezing/Unfreezing stability good
Theoretical spreading rate sqm/l 15 - 20 (thinned on 1:3 ratio with water)
Film gloss Semi-covering water
Thinner Code water
Dry to dust minutes 15
Dry in depth Hours 2-3
Dry to recoat Hours 4-6

Thin the product with water on a 1 to 5 (maximum) ratio according to surface absorbing power. Add water slowly (especially at the beginning) mixing at the same time.

Usually, one layer is enough but for extremely absorbing surfaces (scagliola/chalk, for example) a second layer could be necessary after the first one has dried completely (4 - 6 hours). The best application is by paint brush as it ensures maximum penetration into the surface but it could also be applied by roll. Minimum film temperature is 5°. Do not apply the product at lower temperatures. Keep 2340.0070 White Fixative at higher a temperature than 5°C.
Clean paint brushes and tools with water after use.

1 lt, 4 lt