Products

Interior Paint, Exterior Paints, Primer and others

Admixtures for bonding, jointing and plastering

Tools, personal protective equipment, construction and repair accessories

Thermoinsulation systems

Tile adhesives, grouts and leveling system

Waterproofing products

Dry construction

Profiles, corners and accessories for construction

Decorative paint

Glues and varnishes for parquet

Foams, silicones, adhesives

Industrial paints and coatings

Paints, varnishes and adhesives for wood

Autorefinishing products

Epoxy floors and road markings

Spray Booths

Primers, paints, 3in1 paints, impregnation, wood care varnishes, varnishes for wood and thinners

Industrial paint systems

Facade decorative panels, profiles and ornaments

Catalogs

  • (5)3М
  • (1)BETEK
  • (2)RAL and NCS
  • (1)DEKOR TOOLS
  • (3)EMA-TECH
  • (2)BEKAMENT
  • (1)RAVABER
  • (3)SAN DECO
  • (2)RECOLL
  • (7)TECHNONICOL
  • (1)CANDIS
  • (1)RANAL
  • (5)KEMICHAL
  • (1)ICO
  • (2)THERMOSIDING
  • (1)TIXE
  • (1)NAT POLAND
  • (1)KANSAI
  • (1)STAR PLASTIK
  • (1)BOLDRINI
  • (1)OZPOR

Certificates

  • (1)International
  • (1)Ravaber
  • (1)Kemichal
  • (2)Kansai
  • (2)Filli
  • (1)BETEK
  • (2)GENCH
  • (1)BEKAMENT
  • (1)BONUSPAN
  • (1)OPRCOAT
  • (1)StiroSaur
  • (1)GIAS

Multi Surface Paints, liquid glass and spray

Interior Paint, Exterior Paints, Primer and others / Anti-mold products /

Anti-mould sealer primer - Biosistem fissativo



Anti-mould sealer primer - Biosistem fissativo


product_code: 23400250L0016

Description:

As a sealer to isolate new or already treated mural surfaces, but with presence of chalking zones. It prevents the mould formation and can reclaim the zones already affected, on condition that the quantities are modest. If the mould is spread, treat in advance with 2340.0200 Biosistem Spray (see related technical sheet). It is excellent as an isolating coat for latex paints and wall papers. 

Technical data sheet
Safety data sheet
 

General data

General data Fluid product having milky appearance (composed by an acrylic copolymer) that, after drying, presents a perfectly transparent film having the following characteristics:
• Complete resistance to saponification
• High thinness of the particles that gives raise to an high linking and impregnating power
• High resistance to the water.

Recommended painting cycles

Recommended painting cycles Generally one coat is enough, but for very absorbing surfaces (i.e. on scagliola/chalk) it may also be necessary a second coat to apply when the first one is perfectly dry (after 4 - 6 hours). The minimum film formation temperature is + 5°, for this reason do not apply the product at a lower temperature.

Note

Keep the Biosistem - Fixative Anti-mould 2340.0250 in a temperature higher than 5° C. Brushes and tools for its application can be easily cleaned washing them with water right after use. The possible hardened drops can be easily removed with Nitro Thinner 9210.0012. 
 
23400250L0016 1 лт.
4 лт.
> > > > > > > > > > >