The substrate to which the adhesive is applied must be solid, clean, durable, non-frozen, free from efflorescence, oil residues or paint. The preparation is performed by adding the powder to about 27 -29% of water with vigorous stirring until complete homogenization. Allow the compound to rest for about 10 minutes, then stir again to obtain a suitable density of adhesive. Apply the adhesive using a serrated trowel with a suitable tooth size so that at least 65% of the surface of the tile is covered with adhesive (for interior use) and a minimum of 90% (for exterior use). The size of teeth depends on the size of tiles (4-6 mm optimal for tiles size 10-25 cm). Highly absorbent, porous tiles, should be moistened before installation. Remove excess adhesive with a damp sponge and mechanically remove the hardened parts. See product datasheet for more detailed instructions.

Substrate and air temperatures from +5°C to +25°C.

About 30 minutes (depending on the substrate). Possible to grout after: cca. 24h.

Approximately 3-5 kg/m², depending on the surface and thickness of the application.

12 months in original packaging in dry room on pallets.