After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface defects should be corrected with SAN DECO Acrylic Putty Interior and undercoated with SAN DECO Amarsis Primer. 

AMARSIS has two application methods which is done with brush or trowel.
Brush Application:
The ready-to-use AMARSIS is slowly and softly mixed with a spatula without thinning.During the mixing process do not use mechanical devices.Then it is applied as one coat with special brush. 25 minutes later, use the stainless steel trowel to smooth the decorated surface.Then, apply second coat of AMARSIS after 4-5 hours at 23˚C with brush. 1 hour later, use stainless steel trowel to make pressure on the surface so that the color particles are crushed and reduced in size, light and dark shades of colors are created.
Trowel Application:
AMARSIS is applied to surface with steel trowel as one coat.Then, after 4-5 hours at 23˚C, apply second coat of AMARSIS with the same technique with trowel. 1 hour later, use stainless steel trowel to make pressure on the surface so that the color particles are crushed and reduced in size, light and dark shades of colors are created.The environment of application must be kept between +5 °C to +35 °C within 24 hours during and after the application

Depending on the smoothness, porosity of the surface and the applied method, for one layer:
The decorative paint consumption for 1 m² аrea is 160-200 ml

Dry to touch: 4-5 hours, complete drying: 24-48 hours in a medium of 23 °C.

Store in a sealed package for 6 months between 5 °C and 35 °C.