INSTRUCTIONS FOR USE:

The glue is applied with a gun and a nozzle size should be between 1.5 mm to 2.00 mm. Air pressure is from 3 atmospheres to 6 atmospheres. For central supply systems, use diaphragm pumps for dichloromethane. Recommended operating environment temperature - 18 ° C.
Drying time depends on the amount, type of material and medium temperature. Before spraying, the surface must be dry and clean. After applying the glue, press the two parts to stick. Wait 24 hours for final gluing. Use ACETONE for dilution and cleaning.

PROPERTIES:

Contents: Synthetic resins

Color: Transparent, red, blue, green and others

Viscosity: 400 (± 25) mPas (25 ° C)

Density: 1.20 (± 25) gr / cm³

Application: With spray gun

Drying time: One-sided spraying - between 10 seconds and 2 minutes Double-sided spraying - between 10 seconds and 4 minutes

APPLICATION:

Uni-tek is usually applied with nozzle diameter of 1,5mm – 1,8mm using a pressure of about 3-6 atm The application area should be over 18ºC not to have problems. Amount of the adhesive spreyed and the applied materials type can change the drying time. Be sure that the surfaces are clean and dry. Then spray Bea, let it dry, join this side to the other and press uniformly. To make the adhesion test please wait for 24 hours.
Shelf life: 12 months in original packaging.

Packaging: