Stays permanently elastic after curing.
Acetoxy curing system.
Antibacterial. Mold-proof.
Excellent adhesion to non-porous surfaces.
Resistance to aging, cracking and discoloring.
Resistant to many chemicals, cleaning agents and detergents.
Can be applied in any season.
Typical acetic smell during curing.
Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.

Ensure that surfaces to be sealed are clean, dry and grease free.
The application temperature must be between +5 °C and +40 °C.
In order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 5x5 mm, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a backup material.
After the application, the sealant must be tooled with light pressure within 5 minutes to spread the material against the joint surfaces and to obtain a professional finish.