CHARACTERISTICS
Interior decorative sand plaster, ecological, water-based, with high vapor permeability. Gives a shiny, pearly and textured look to the applied surface.

AREA OF APPLICATION
After cleaning and preparing the surface, the decorative sand plaster - SAHARA, can be applied to old painted surfaces, concrete, gypsum, black plaster and wooden surfaces.

SURFACE PREPARATION
Preparation and application for uneven or old crumbling coatings:
1. The surface must be thoroughly cleaned of dust, grease or other dirt. All old crumbling or unstable coatings must be completely removed.
2. Application of a concrete contact type primer to strengthen the base, for better adhesion and to provide a more stable surface for subsequent coatings.
3. Leveling with fine polymer putty, if necessary. In case of irregularities, cracks or other defects on the surface after priming, they must be filled and leveled to achieve an even and smooth surface.
4. Sanding the putty to obtain a smooth coating. After the putty is completely dry, the surface is sanded with suitable sandpaper or a grinder. The sanding dust must be removed.
5. Applying a primer for decorative plasters. On the sanded and cleaned surface for a stronger base and good adhesion, a primer for decorative plasters is applied, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
6. Applying the decorative plaster. After the primer has dried on a smooth surface without defects, the decorative plaster - SAHARA can be applied.

Preparation and application on a solid and even surface:

1. Application of a primer for decorative plasters, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
2. After the primer has dried, the final application of the decorative plaster - SAHARA is carried out.

APPLICATION
The decorative sand plaster is applied without dilution to the primed surface with a brush. The desired decorative effect is also formed with a brush before the decorative plaster dries.

IMPORTANT INSTRUCTIONS
Before use, the decorative plaster must be mixed well until a homogeneous mixture is obtained.
It is applied at a temperature of +5°C to +35°C.
Surfaces must be dry and clean.
Application is carried out according to the application information on the label.
Treated surfaces must be protected from mechanical impact for 3 days and from rain, snow, frost or high temperatures for 24 hours. After each application, clean brushes, rollers and tools with water.