CHARACTERISTICS
Venetian plaster with a marble effect, glossy, with high coverage.
Thanks to its elastic structure, it does not crack.
Ecological plaster with high vapor permeability, easy to clean, water-based.

AREA OF APPLICATION
After cleaning and preparing the surface, Venetian plaster can be applied to old painted surfaces, concrete, gypsum, lime-cement plaster and wooden surfaces.

SURFACE PREPARATION
Preparation and application for uneven or old crumbling coatings:
1. The surface must be dry, thoroughly cleaned of dust, grease or other dirt. All old crumbling or unstable coatings must be completely removed.
2. Application of a concrete contact type primer to strengthen the base, for better adhesion and to ensure a more stable surface for subsequent coatings.
3. Leveling with fine polymer putty, if necessary. In case of irregularities, cracks or other defects on the surface after priming, they must be filled and leveled to achieve an even and smooth surface.
4. Sanding the putty to obtain a smooth coating. After the putty is completely dry, the surface is sanded with a grinder or with sandpaper of a coarseness depending on the roughness. The dust formed from the sanding must be cleaned.
5. Applying a primer for decorative plasters. On the sanded and cleaned surface for a stronger base and good adhesion, a primer for decorative plaster is applied, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
6. Applying the decorative plaster. After the primer has dried on a smooth surface without defects, the Venetian plaster can be applied.
7. After applying and polishing the Venetian plaster, apply wax for Venetian plaster.

Preparation and application on a solid and even surface:
1. Application of a primer for decorative plaster, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
2. After the primer has dried, the final application of the Venetian plaster is carried out.
3. After applying and polishing the Venetian plaster, apply wax for Venetian plaster.

APPLICATION
Before use, the Venetian plaster is mixed well until a homogeneous mixture.
Ready for use, it is applied without dilution on a pre-primed surface. The application is carried out with a trowel or spatula in a minimum of two layers. After applying the second layer, different colors can be added and combined.
The interval between layers is 4-6 hours. The material is applied by forming an even and smooth surface by crosswise, horizontal and vertical movements with a spatula or trowel. In the final stage, by applying pressure on the trowel, the surface is polished, working left-right, up-down and in circular movements.

IMPORTANT INSTRUCTIONS
Before use, the plaster must be mixed well until a homogeneous mixture is obtained.
It is applied at a temperature of +5°C to +35°C.
The surfaces must be dry and clean. The application is carried out according to the application information on the label.
The treated surfaces must be protected from mechanical impacts for 3 days, and from rain, snow, frost or high temperatures for 24 hours. Clean brushes, rollers and tools with water after each application.