CHARACTERISTICS
Gives a glossy and textured appearance to the treated surface. Water-based decorative plaster and an environmentally friendly product. It is characterized by high vapor permeability and easy cleaning by wiping.

AREA OF APPLICATION
After cleaning and priming the surface, the decorative plaster can be applied to old painted surfaces, concrete, gypsum, cement plaster, cement boards and wooden surfaces.

SURFACE PREPARATION
Preparation and application for uneven or old crumbling coatings:
1. The surface must be thoroughly cleaned of dust, grease or other dirt. All old crumbling or unstable coatings must be completely removed.
2. Application of a concrete contact type primer to strengthen the base, for better adhesion and to provide a more stable surface for subsequent coatings.
3. Leveling with fine polymer putty, if necessary. In case of irregularities, cracks or other defects on the surface after priming, they must be filled and leveled to achieve an even and smooth surface.
4. Sanding the putty to obtain a smooth coating. After the putty has completely dried, the surface is sanded with suitable sandpaper or a grinder. The sanding dust must be removed.
5. Applying a primer for decorative plaster. On the sanded and cleaned surface for a stronger base and good adhesion, a white or pre-colored decorative plaster primer is applied, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
6. Applying the decorative plaster. After the primer has dried on a smooth surface without defects, the decorative pearl plaster can be applied.

Preparation and application on a solid and even surface:

1. Application of a primer for decorative plaster, white or pre-colored, depending on the requirements for the final color and coverage. It is recommended to color the primer in the same color as the plaster to achieve better results.
2. After the primer has dried, the final application of the decorative pearl plaster is carried out.

APPLICATION
Apply to the primed surface without dilution with a brush. The desired structure/pattern is formed using a brush before the decorative plaster dries.

IMPORTANT INSTRUCTIONS
Before use, the plaster must be mixed well until a homogeneous mixture is obtained.
Apply at a temperature of +5°C to +35°C.
The surfaces must be dry and clean.
Application is carried out according to the application information on the label.