The temperature in the application room should be at least + 5°C. The surface to be treated must be clean of dust, greasy stains, and etc.. Prior to laying, dry and warmed surfaces should be moistened.

Pour water into a clean container according to the amount of solution (ratio: 10 kg of gypsum adhesive to 5 liters of water) and add the glue. Wait two minutes for the mixture to "ripen" and add more water. For better homogeneity use a machine mixer. After mixing, the mixture is ready for use. The resulting mixture should be used within 30 minutes. Laying starts from the edge of the wall. The gypsum adhesive should be laid on the back of the boards at least three places along the entire length with 30 cm spacing or directly on the wall. The board is pressed between the support beam and the wall. During installation, the balance between the boards must be observed. Technical specifications should be adjusted according to the workspace, climatic conditions and laying surface.

Dilution: 5 liters of water, 10 kg of gypsum adhesive.
Working time: 30 minutes.
Curing time: 45 minutes.
Shrinking force: min. 3 kg f/cm²
Thermal conductivity: max. 0.35 W/mk

Store in the package by the manufacturer, in a closed package, on a pallet.

Polypropylene mesh bag, 30 kg ± 2%