It can be applied on interior and exterior surfaces made of iron, steel, aluminum, zinc (galvanized surfaces), PVC, copper, wood.

Surfaces of 10-11 m² can be primed with 1 liter of 1 coat. It is necessary to make a sample of the exact cost.

If there is resin or unevenness on wood surfaces, they must be cleaned beforehand and then sanded. Before applying the high adhesion primer on a raw wood, it must be impregnated. During application, the moisture level should not exceed 12% for hardwoods and 15% for softwoods. For both interior and exterior surfaces, applying the primer to 1 coat is enough. For zinc (galvanized) surfaces, rigid PVC, copper and aluminum surfaces, the surface must be sanded before application of the primer. On other surfaces, the need for sprinkling depends on their condition. Dust, dirt and grease must be removed from the surface. For zinc exterior surfaces, it is recommended to apply the primer to two coats. For metal surfaces, dirt must also be removed and it is recommended to apply the primer to 1 coat and 2 to 2 for exterior surfaces.
Application: Apply with a roller, brush or flexible guide.
Important Information: The temperature of the air and all types of surfaces should be between + 5 °C and + 30 °C; the relative humidity should be less than 80%. The spraying pressure should be 150 bar. Nozzle angle: 50 °. Nozzle size: 0.013 inch.

Dry to touch: 45 min Ideal drying: 3-4 hours.

Dilution

When applied with a flexible guide, the dilution with Bettek Synthetic Thinner should be 5-15%, and with brush or roller application - about 5%.

0.75 l, 2.5 l