Water based, intensely concentrate primer with high penetration and adherence.

Fawori Concentrated Primer coat enables a better adhesion by setting a bridge between the paint and the surface. It reduces the absorbance of the applied surface, prevents quick dry of the paint and uneven color distribution by the final coat on surfaces with different absorbance. Reduces paint use and returns profit.

Applied on plaster, whitewash, surfaces with low quality paint absorbance, aerated concrete, and similar surfaces with high absorbance and with dusting behavior.

Application surface has to be dry, clean and self-supporting. The primer shall be applied after dusting off the surface with sandpaper on plaster and similar surfaces. Once reduced, Fawori Concentrated Primer shall be applied by roller brush or paintbrush without polishing or polling. The surface temperature shall be between +5°C and +30°C during application. The surface must be protected against frost. The paint coat should be applied at least 4 hours following Fawori Concentrated Primer application. It is absolutely inadvisable to use the primer by reducing with less water or by polling, for isolation purposes, on solvent-based primer, glitoline paste or on paint. WARNING Any vitreous surface shall be formed upon Fawori Concentrated Primer applied surfaces. The surface shall be absolutely cleaned and mattified by sandpaper or by mechanic methods. If not, problems such as peeling, cracking, spatting, roller brush marks or concealing issues may appear. The coat shall never be applied by Airless (spraying) method and without being reduced. Our products must be used on infrastructure surfaces constructed according to General Technical Construction Specifications of 30.06.2007 no. 26568.

For silicone paint 1 dose primer with 7 doses water; for plastic paint, 1 dose paint with 10 doses water.

(at 20ºC, %65 HR) Touch dry: 1 hour Paint application: 4 hours (drying time may be longer with higher relative humidity and lower temperatures).

Depending on type, absorption and structure of the application surface, an area of 40-65 m² may be coated on single layer (by 1/7 reduction). Controlled specimen study should be leaded for exact consumption rate. STORAGE Can be stored unopened for 3 years in a cool and dry place protected from frost and direct sunlight. Cap hermetically just after use.